Usage rate in the NBA is the share of his team's plays a player uses while he is on the court, counting his shots, free throws and turnovers. Luka Doncic of the Los Angeles Lakers leads the 2026-27 season at 40.5%, the only one of 201 qualified players above 40%.
This guide gives the usage rate formula, works it through with Doncic's real totals, ranks the top 10, lists each team's highest-usage player and explains what a high or low number means. Every figure comes from our box scores for the 226 regular-season games played from October 20 to November 19, 2026. Qualified means 8 or more games and 20 or more minutes a game. The per-game inputs (field-goal attempts, turnovers, minutes) for every player sit side by side in the NBA stats matrix.
What is usage rate in the NBA?
Usage rate (USG%) is the percentage of a team's 100% of possessions that 1 player finishes while he is on the floor. With 5 players on court, an even split is 20%, and the median qualified player in 2026-27 sits at 19.9%. A usage rate of 30% means 3 in 10 team plays end with him.
A play "ends" with a player when he takes a field-goal attempt, goes to the free-throw line or turns the ball over. Assists, rebounds and defense do not count, so usage measures how much of the offense runs through 1 player, not how well he plays. It is a rate, not a total: it adjusts for minutes, so a bench scorer and a 38-minute starter can be compared on 1 scale. Shot volume is on the NBA stats matrix and on the field goals attempted leaders page.
How is usage rate calculated?
The usage rate formula is USG% = 100 x (FGA + 0.44 x FTA + TOV) x (team minutes / 5) / (player minutes x (team FGA + 0.44 x team FTA + team TOV)). FGA is field-goal attempts, FTA is free-throw attempts and TOV is turnovers, all counted in the games the player played.
In plain terms there are 2 steps: find the player's share of his team's plays, then divide by his share of the court time. The 0.44 turns free throws into plays, the same factor used in our true shooting percentage guide, because 2 free throws do not always end 1 possession. Doncic's 14 games make a worked example, and every total in it is on the Luka Doncic game log.
Luka Doncic usage rate, worked step by step
Doncic and the Lakers in his 14 games, October 20 to November 19, 2026. Box-score minutes.
| Step | Calculation | Result |
|---|---|---|
| 1. Doncic plays | 358 FGA + 0.44 x 147 FTA + 71 TOV | 493.7 |
| 2. Lakers plays | 1,198 FGA + 0.44 x 414 FTA + 221 TOV | 1,601.2 |
| 3. Share of team plays | 493.7 / 1,601.2 | 30.8% |
| 4. Share of court time | 504 min / (3,311 min / 5) | 76.1% |
| 5. Usage rate | 30.8% / 76.1% | 40.5% |
Doncic used 30.8% of all Lakers plays across his 14 games, but he was on the floor for only 76.1% of the time a single player could have been. Dividing one by the other gives 40.5%. His 71 turnovers, 5.1 a game, add 71 plays on their own; the turnovers leaders show where that ranks.
Who has the highest usage rate in the NBA?
Luka Doncic has the highest usage rate in the NBA in 2026-27 at 40.5% over 14 games, 3.7 points ahead of Shai Gilgeous-Alexander of the Oklahoma City Thunder at 36.8%. Victor Wembanyama of the San Antonio Spurs is 3rd at 35.5%.
NBA usage rate leaders 2026-27
Top 10 of 201 qualified players (8+ games, 20+ minutes a game). Games October 20 to November 19, 2026.
| Player | Team | USG% | PPG |
|---|---|---|---|
| 1. Luka Doncic | LAL | 40.5% | 38.1 |
| 2. Shai Gilgeous-Alexander | OKC | 36.8% | 31.1 |
| 3. Victor Wembanyama | SAS | 35.5% | 28.6 |
| 4. Stephen Curry | GSW | 34.1% | 27.8 |
| 5. Darius Acuff Jr. | SAC | 33.3% | 26.2 |
| 6. Jayson Tatum | BOS | 33.0% | 26.4 |
| 7. Brandon Miller | CHA | 32.6% | 19.9 |
| 8. Giannis Antetokounmpo | MIA | 32.5% | 28.2 |
| 9. Jalen Brunson | NYK | 32.5% | 26.6 |
| 10. Ty Jerome | MEM | 31.8% | 25.4 |
Stephen Curry is 4th at 34.1% while playing 25.6 minutes a game, the fewest of the top 10, which shows usage measures the share of plays while on court, not volume. Rookie Darius Acuff Jr. of the Sacramento Kings is 5th at 33.3%. Jayson Tatum, Brandon Miller, Giannis Antetokounmpo, Jalen Brunson and Ty Jerome complete the top 10, all between 31.8% and 33.0%. The scoring side of the same players is on the points leaders page.
What is a good usage rate in the NBA?
A usage rate of 20% is average for an NBA player, because 5 players share 100% of the plays, and 25% or more marks a team's main scorer. In 2026-27, 45 of 201 qualified players are at 25% or higher and only 13 reach 30%.
How 2026-27 usage rates are spread
201 qualified players, games October 20 to November 19, 2026.
| Usage rate | Players | Typical role |
|---|---|---|
| 30% or more | 13 | First option, offense built around him |
| 25% to 29.9% | 32 | Lead or co-lead scorer |
| 20% to 24.9% | 52 | Regular second or third option |
| 15% to 19.9% | 73 | Role player, spot-up or roll man |
| Under 15% | 31 | Defender or connector, few shots |
"Good" depends on the role. A high usage rate is only good if the player scores efficiently on those plays; a 30% usage with a low field-goal percentage can cost a team points. A low usage rate is normal for a defensive specialist. The 31 qualified players under 15% are mostly players who are on the floor for defense, rebounding or passing.
Usage rate by team: each team's highest-usage player
Every one of the 30 teams has a player at 25% or more: the lowest team leader is Jeremiah Fears of the New Orleans Pelicans at 25.2%. The 13 players at 30% or higher are each the top option on a different team, so no team has 2 players above 30%.
Highest usage rate on each NBA team, 2026-27
Qualified players only (8+ games, 20+ minutes a game). Team as of the player's latest game. Games through November 19, 2026.
| Team | Player | USG% |
|---|---|---|
| LAL | Luka Doncic | 40.5% |
| OKC | Shai Gilgeous-Alexander | 36.8% |
| SAS | Victor Wembanyama | 35.5% |
| GSW | Stephen Curry | 34.1% |
| SAC | Darius Acuff Jr. | 33.3% |
| BOS | Jayson Tatum | 33.0% |
| CHA | Brandon Miller | 32.6% |
| MIA | Giannis Antetokounmpo | 32.5% |
| NYK | Jalen Brunson | 32.5% |
| MEM | Ty Jerome | 31.8% |
| TOR | Scottie Barnes | 31.4% |
| ORL | Franz Wagner | 30.5% |
| DET | Cade Cunningham | 30.4% |
| CLE | Donovan Mitchell | 29.5% |
| POR | Deni Avdija | 29.4% |
| PHI | Joel Embiid | 29.3% |
| MIN | LaMelo Ball | 29.2% |
| DAL | Cooper Flagg | 29.1% |
| WAS | Anthony Davis | 28.9% |
| LAC | Darius Garland | 28.7% |
| PHX | Devin Booker | 28.6% |
| UTA | Keyonte George | 28.5% |
| IND | Pascal Siakam | 28.0% |
| DEN | Nikola Jokic | 27.9% |
| BKN | Julius Randle | 27.6% |
| MIL | Tyler Herro | 27.2% |
| CHI | Norman Powell | 27.0% |
| HOU | Alperen Sengun | 26.3% |
| ATL | Nickeil Alexander-Walker | 25.9% |
| NOP | Jeremiah Fears | 25.2% |
Does a high usage rate mean more points?
A high usage rate does not always mean more points, because usage counts plays used, not points scored on them. Nikola Jokic of the Denver Nuggets ranks only 26th of 201 at 27.9% yet averages 24.1 points, while Brandon Miller ranks 7th at 32.6% and averages 19.9.
The gap comes from efficiency and minutes. Jokic has a true shooting percentage of 59.7% on 18.2 shots a game; Miller is at 47.2% on 19.5 shots a game in fewer minutes, 30.1 against 36.2. LaMelo Ball of the Minnesota Timberwolves shows the same pattern at 29.2% usage and 17.6 points. Pairing usage with shooting efficiency tells the fuller story: our true shooting leaders rank the efficiency side, and the NBA stats matrix shows points, attempts and minutes in 1 sortable table.
Why do turnovers count in usage rate?
Turnovers count in usage rate because a turnover ends a possession just as a shot does, so 1 turnover uses 1 play. Draymond Green of the Golden State Warriors shows the effect: he has 32 turnovers against 41 field-goal attempts in 13 games, so 42% of his plays are turnovers.
Green's usage rate is 9.7%, 199th of 201 qualified players, at 3.2 points a game. Without the turnovers it would be about 5.6%. The same rule pushes ball-handlers up: Doncic's 71 turnovers are 14% of his 493.7 plays. Turnovers are on every player's game log and on the turnovers leaders page.
How to use usage rate for fantasy and projections
Usage rate is most useful for spotting role changes: when a high-usage player is out, his 30% or more of the plays go to teammates. Watch the NBA injury report for a top option missing, then check who gains shots in the NBA stats matrix.
Our NBA player projections start from expected minutes and recent usage, so a player whose role grows shows up there first. For fantasy, a rise in usage usually lifts points and PRA; the fantasy basketball rankings and the streamers page show who is gaining minutes. Usage rate alone says nothing about efficiency or defense, so read it with shooting numbers and with at least 8 to 10 games of data.
How we calculated these numbers
We summed every player's field-goal attempts, free-throw attempts, turnovers and minutes from the box scores of all 226 regular-season games from October 20 to November 19, 2026, which are on the NBA results page. Team totals cover only the games each player played, and team minutes are the sum of player minutes in those games.
The leaderboard covers 201 players with 8 or more games and 20 or more minutes a game. Per-game averages here can differ by 1 game from the NBA stats matrix, which refreshes on its own schedule. Usage rates move fast this early: 1 big night can shift a player 1 to 2 points.